Designed for the endurance rider and road racer, Zipp’s 353 NSW Tubeless Disc-Brake is our most advanced wheelset in every performance area and our first AXS connected wheelset. The 353 NSW wheelse...
See more
The 353 NSW wheelset weighs 1310g in its lightest configuration (includes 12mm through axles and XDR body, Zipp AXS Wheel Sensor, tape, and valves.)
See more
Yes, the ZIPP AXS Wheel Sensor is included on the 353 NSW wheel. Integrated into the rim, the sensor ensures you have accurate on the bike tire-pressure monitoring.
See more
The serial number for your 353 NSW wheel is located on a decal on the rim opposite of the valve. It is also located on the shipping box, near the manufacturer's part number and bar code.
See more
Yes, the 353 NSW wheel is covered by Zipp’s Lifetime Warranty, covering you not just for any manufacturing defects, but also for any system failure that occurs while riding your bike within the int...
See more
For basic maintenance, clean your Zipp wheels with soap and water. If using a power washer when cleaning your wheels, ensure that you do not spray directly into the bearings. Avoid spraying degreas...
See more
The Goodyear Vector R Z30 NSW is the most optimized tire for the 353 NSW and will give the best performance. The 353 NSW wheel is optimized for 30mm tires, but tires from 29mm to 35mm can be used.
See more
The max tire pressure recommended with your 353 NSW wheels is 73 psi/5 bar (see the chart below for more details). Using your Zipp AXS Wheel Sensor, you can easily find tire pressure suggestions in...
See more
Yes! The sealant injector that comes with your 353 NSW wheels allows sealant to bypass the AXS Wheel Sensor. Injecting sealant without the injector will flood the AXS Wheel Sensor and can damage it...
See more
Yes! The 353 NSW wheel can be used with a tube that has a threaded valve. In order for the AXS Wheel Sensor to work you must use the threaded valve tube that is included with your wheel purchase. A...
See more
The tube that comes with your 353 NSW wheel is designed to work with the AXS Wheel Sensor and due to holes in the valve, will not hold air in a setup that does not include the AXS Wheel Sensor.
See more
Your 353 NSW wheel uses 26mm wide tubeless tape. While we recommend using the original Zipp branded tape, other aftermarket tape can be used. Examine your tape whenever you change your tire. If the...
See more
The 353 NSW wheel graphics are applied using both Zipp’s ImPress direct-print technology and molded graphic technology and are not removable. ImPress rims should be cleaned with Soap and water. If ...
See more
The Goodyear Vector R Z30 NSW tire was designed alongside the new 353 NSW rim to perfectly match and provide the aerodynamic efficiency, rolling efficiency, and vibrational loss control that will g...
See more