Although both 1ZERO HITOP wheels share identical rims, layup, and carbon fiber material, they diverge in terms of their hubs, spokes, and nipples. Furthermore, the artwork technologies employed dif...
See more
Each 1ZERO HITOP carbon rim is meticulously crafted and molded by hand at our factory located in Taiwan. The hubs are manufactured either in Portugal (ZM2 SL) or Taiwan (ZM 900). Subsequently, we t...
See more
Graphics are clear coated, so they cant be removed. 1ZERO SW graphics are baked onto the rim, for increased durability and no weight. Therefore, they cannot be removed. 1ZERO S graphics are adhesiv...
See more
1ZERO SW: In the ZM2 SL hub, a 6-pawl mechanism is utilized, featuring two sets of three pawls with an offset arrangement. This configuration effectively transforms the 33 teeth of the ratchet ring...
See more
The International Organization for Standardization (ISO) permits the use of tires ranging from 1.85 inches to 2.8 inches on rims that are 30mm wide. However, our recommendation is to use tires with...
See more
Max tire pressure shouldn’t exceed 50 psi/3.45 bar on your 1ZERO HITOP wheels. For a good starting point on tire recommendation, visit our digital pressure guide. (https://axs.sram.com/guides/tire/...
See more
Yes. Both style of end caps are delivered with the front wheel. The torque cap for front hubs on the NDS comes in 2 pieces, to allow the installation of center locking brake rotors. See instruction...
See more